Here's a neat way of marking and labeling things with the designs endless to your imagination.
I like customizing things and creating my own look.
All you need is your pc , printer and some full clear label sheets, I used the Avery brand.
1st create you design/label and print it on the clear label sheet. Then cut it out and stick. Then you need to cut a 2nd pc of clear to put over the 1st to seal it and keeping the ink from washing off.
The sticker will be transparent to a point so a lite color background is needed. I have use a lite color sticker material under the 1st /org sticker before with good results on dark color backgrounds.
After the 2nd pc of clear is on to protect the ink you need to wet it and get the film off the 2nd pc ... This will give it a shinny finish.
All the ones I have made have been for my snowmobile and I have had good results in it's harsh conditions.
Here's some pics....
2nd pc
smooth out air
wash film off
Bingo you have a new sticker
Made the "winter rules" one
It's fun and it's endless to the designs you can make .
Here one I made to go on black, just use a pc of white underneath the 1st pc
(rotax SS)
Have fun :wink:
snow